Why we recommend it: Order growth coincided with higher margins. Combined with the semiconductor and data center demand cited in the press release headline, this offers a read on the changing fortunes of laser equipment makers.
Laser
All topicsLasers, ultrafast lasers, laser processing and laser applications.
Latest picks
Items 1–20 of 27
TRUMPF@TRUMPF_NewsOptics industryPicksAI score5959
Optica News CenterOptics industryPicksAI score6666 Chip-Scale Optical Ring Laser Gyroscope Measures Slow Rotations of 37 Degrees per Hour
A team from UC Santa Barbara and Caltech published in Optics Letters a chip-scale optical ring laser gyroscope capable of measuring rotations as slow as 37 degrees per hour, approaching Earth's rotation rate of 15 degrees per hour. The device is based on a low-noise Brillouin laser in a silicon nitride waveguide photonic integrated circuit, can be fabricated with standard CMOS processes, requires only milliwatt-level optical power, and offers nearly 2,000-fold higher sensitivity than the team's earlier device.
Why we recommend it: Compared with the team's earlier silicon nitride Brillouin gyroscope rated at 72,000 degrees per hour, this is nearly a 2,000-fold improvement, helping gauge how far on-chip optical gyroscopes are from navigation applications.
optics.org (SPIE Industry News)Optics industryOptics and AIPicksAI score7474 Chip Demand Keeps Growing; ASML Studies Further Expanding Lithography Equipment Capacity
ASML said its existing 2027 and 2028 supply plans cannot fully meet customer demand and that it is studying a further expansion of 2028 capacity beyond the previously planned 30% increase. Quarterly sales through September 27 were EUR 11.7 billion, up more than 50% year over year. The NXE:3800F EUV lithography system slated for introduction next year will raise productivity from 230 to 260 wafers per hour.
Why we recommend it: Capacity expansion and productivity upgrades are proceeding in parallel, offering concrete industry clues on how AI demand translates into EUV lithography equipment supply constraints.
Optics & Photonics NewsOptics industryPicksAI score6363 Self-Aligned Dual-Pump Scheme Offers New Route to Optical Frequency Combs
Scientists in the United States and New Zealand have demonstrated a new type of frequency comb based on a dual-pump laser, using a self-alignment mechanism that could move frequency comb technology from niche use toward broader applications. Miro Erkintalo of the University of Auckland participated in the research.
Why we recommend it: The source article explains the combination of dual pumping and self-alignment, offering a useful reference for simplifying frequency comb devices
C114 Communications Network · Optical CommunicationsOptics industryOptics and AIPicksAI score6767 Lumentum CEO: 2029 Capacity Almost Fully Booked
Lumentum CEO Michael Hurlston said in an interview in Tokyo that about 70% of demand for some products will remain unmet next year, while other products still face a 30% demand gap through 2028. The company's 2029 capacity is almost fully booked, and it is ramping production at full speed.
Why we recommend it: The article provides specific demand gap percentages, directly reflecting the tightness of laser chips upstream in AI optical communications
Optics & Photonics NewsOptics industryPicksAI score6161 Australian Team Achieves All-Optical Control of Metasurface Functionality
Ziwei Yang and colleagues at the ARC Centre for Transformative Meta-Optical Systems at the Australian National University demonstrated a method of controlling nonlinear optical metasurface functionality with light, changing the traditional situation in which nonlinear metasurface functions are fixed after fabrication.
Why we recommend it: The article explains the approach of dynamically switching metasurface functions with light, offering reference value for reconfigurable meta-optics
Optics & Photonics NewsOptics industryPicksAI score5959 UC San Diego switches magnetic information in materials with structured light
Engineers at the University of California, San Diego demonstrated a new method for switching magnetic information in a material using specially designed ultrafast laser beams, without an external magnetic field.
Why we recommend it: The original article demonstrates the use of structured light in all-optical magnetic storage, relevant to light-controlled magnetic recording
Phys.org Optics & PhotonicsOptics industryPicksAI score6161 New chip-scale frequency comb demonstrates potential for portable atomic clocks
Researchers have demonstrated a new chip-scale optical frequency comb formation process in which two laser beams interact, enabling a range of precision measurements and showing potential for use in portable atomic clocks.
Why we recommend it: The original article explains the path from chip-based frequency combs to portable timekeeping, serving as a reference for integrated photonic precision measurement
Phys.org Optics & PhotonicsOptics industryPicksAI score6565 EPFL develops photonic integrated laser that stays locked without active control
Researchers at EPFL have developed a photonic integrated, infinite self-injection-locked laser that remains locked without active control and has been packaged in a fiber-coupled standard butterfly package.
Why we recommend it: The original article presents an integrated narrow-linewidth laser that can be packaged directly, relevant to simplifying laser sources in optical communications and sensing
Laser Focus WorldOptics industryPicksAI score6161 DTU 'Bakes' Fiber to Nearly Double the Range of Ultralow-Noise Supercontinuum Lasers
A team at DTU Electro in Denmark has made progress on ultralow-noise supercontinuum lasers, using heat treatment of the fiber to nearly double the spectral range compared with similar low-noise sources.
Why we recommend it: The original paper presents a simple fiber post-processing method that is useful for supercontinuum light source design
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryOptics and AIPicksAI score5959 SIOM Uses Improved YOLOv8-seg for Intelligent Laser Spot Analysis in High-Power Laser Facilities
The Joint Laboratory for High Power Laser and Physics at the Shanghai Institute of Optics and Fine Mechanics (SIOM) has proposed a laser spot analysis system based on an improved YOLOv8-seg to meet the need for rapid, precise alignment of optics along the full chain of high-power laser facilities, and has completed experimental validation.
Why we recommend it: The original paper demonstrates a deep learning segmentation model for laser facility alignment, a case of AI entering optical assembly and adjustment
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score6363 SIOM Proposes Programming Coherent and Quantum Light Sources with Free-Electron Wave Packets
Researcher Tian Ye and Academician Li Ruxin at the Shanghai Institute of Optics and Fine Mechanics (SIOM), together with Researcher Pan Yiming at ShanghaiTech University and colleagues, have proposed a new mechanism that uses the quadratic phase accumulated during the propagation of free-electron quantum wave packets to simultaneously achieve selectable high-harmonic bunching and synthesis of nonclassical quantum light, linking quantum state control, high-harmonic radiation and quantum light synthesis.
Why we recommend it: The original paper proposes a unified framework for free-electron lasers and quantum light sources, relevant to novel light source research
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score6161 SIOM Achieves High-Power Few-Cycle Pulse Compression with Dispersion-Engineered Multi-Pass Cell
A team from the State Key Laboratory of Ultra-Intense Laser Science and Technology at the Shanghai Institute of Optics and Fine Mechanics (SIOM) achieved few-cycle nonlinear pulse compression in a dispersion-engineered folded multi-pass cell, producing high-power few-cycle ultrafast laser pulses. The results were published in Optics Letters.
Why we recommend it: The original article presents a multi-pass cell compression scheme for few-cycle pulses, relevant to high-power ultrafast lasers
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score6161 SIOM Achieves All-Optical Arbitrary Control of Chirality and Ellipticity in Solid-State High Harmonics
A team from the State Key Laboratory of Ultra-Intense Laser Science and Technology at the Shanghai Institute of Optics and Fine Mechanics (SIOM) achieved, for the first time, all-optical arbitrary control of chirality and ellipticity in solid-state high harmonics through dynamical symmetry engineering and quantum geometric phase manipulation.
Why we recommend it: The original article presents an all-optical means of controlling solid-state high-harmonic polarization, relevant to circularly polarized attosecond light sources
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score6161 SIOM Achieves Highly Reliable Laser Joining of Titanium Alloys and Nickel-Based Superalloys
A team led by Yang Shanglu at the Shanghai Institute of Optics and Fine Mechanics has suppressed brittle intermetallic compounds in laser joining of dissimilar Ti/Ni materials, improving joint reliability.
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score5959 SIOM Achieves Petawatt Laser-Driven Multi-Pulse, Multi-Angle Ultrafast X-Ray Imaging
SIOM has made progress in petawatt laser-driven multi-pulse, multi-angle ultrafast X-ray imaging.
Why we recommend it: The source provides specific data and details that help assess actual progress in this direction
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score6161 SIOM Makes Breakthrough in Accelerating High-Energy Protons with Transition Radiation Fields
SIOM has made a major breakthrough in accelerating high-energy protons using transition radiation fields.
Why we recommend it: The source provides specific data and details that help assess actual progress in this direction
Shanghai Institute of Optics and Fine Mechanics (SIOM) · Research UpdatesOptics industryPicksAI score6161 SIOM Makes Progress in High-Repetition-Rate, High-Power Ultrafast Lasers
SIOM has made progress in research on high-repetition-rate, high-power ultrafast lasers.
Why we recommend it: The source provides specific data and details that help assess actual progress in this direction
Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP) · Research ProgressOptics industryPicksAI score6060 Changchun Institute of Optics, Fine Mechanics and Physics Develops Goblet-Shaped Waveguide Mid-Infrared Quantum Cascade Laser with Room-Temperature Low-Power Output
A team led by Researcher Meng Bo at the Changchun Institute of Optics, Fine Mechanics and Physics published a paper in Laser & Photonics Reviews presenting a mid-infrared quantum cascade laser with a goblet-shaped waveguide structure, using selective wet etching of the active region and eliminating the semi-insulating InP lateral regrowth process. A 1 mm x 3 um device achieved a continuous-wave threshold power consumption of about 1 W at 293 K, an output power above 27 mW, and a room-temperature pulsed wall-plug efficiency of 3.9%. A 2 um-wide device achieved stable single-mode lasing across the entire current range, with a side-mode suppression ratio of about 20 dB.
Why we recommend it: The goblet-shaped waveguide eliminates the semi-insulating InP regrowth process through selective wet etching. The original paper gives room-temperature continuous-wave threshold power consumption and wall-plug efficiency, which can be compared with buried heterostructure devices for context.
Xi'an Institute of Optics and Fine Mechanics (XIOPM) · Research ProgressOptics industryPicksAI score6161 Xi'an Institute of Optics and Precision Mechanics Advances High-Repetition-Rate, High-Energy Ultrafast Thin-Disk Laser
Teams led by Fu Yuxi and Cao Huabao at the Xi'an Institute of Optics and Precision Mechanics have made new progress in high-repetition-rate, high-energy ultrafast thin-disk lasers.
Why we recommend it: The original article provides specific data and details that help assess the actual progress in this direction.